DETECT KNOWLEDGE BASE | XP KNOWLEDGE CENTRE
A new firmware update is available for your XP metal detector. But how do you install it, which components need updating, and what should you do if the update fails?
XP continues to develop the software for its metal detectors and wireless accessories. Updates can introduce new features, improve performance, change compatibility or resolve problems.
In this guide, we explain how to update the XP DEUS II, ICON, ICON X and current ST headphones correctly. We also cover common update problems and the important V4.21 firmware update for ST headphones.
Updating your XP metal detector? Start here
Only use the official XP Metal Detectors update platform for firmware updates.
Open the official XP Updater →
View all XP update options and product families →
Always select the correct detector platform. DEUS II, ICON and the original DEUS are different systems.
Which XP component do you want to update?
Update the remote control, WS6 ST and other supported components using the DEUS II updater.
View DEUS II instructions →Use the ICON update procedure for the control unit and supported headphones.
View ICON instructions →Check the software version and follow XP's instructions for your configuration.
View ST update V4.21 →These headphones can also function as a Master control unit with the DEUS II.
View WS6 ST explanation →1. Why should you update your XP metal detector?
A modern XP metal detector is an electronic system whose operation is partly controlled by software. This allows XP to release improvements without requiring you to buy an entirely new detector.
What can a firmware update change?
- New or adjusted features and search settings.
- Improvements to audio and volume control.
- Changes to detection behaviour or signal processing.
- Better compatibility between supported wireless components.
- Fixes for specific software problems.
Is every XP update mandatory?
No. Not every update is essential for every user. Read XP's release information and check whether the update applies to your model and configuration.
When XP explicitly makes an update mandatory, following those instructions is important. One example is the announced V4.21 update for the current ST headphones.
Will my detector automatically perform better after updating?
Not every change will provide a noticeable benefit in every environment. Sometimes an update changes audio behaviour or a feature's default settings.
It is therefore a good idea to test your detector carefully after updating.
2. Updating XP: What do you need?
Good preparation helps prevent many common update problems.
Checklist before you begin
- A computer with a modern web browser supported by XP.
- A stable internet connection.
- The correct USB or update cable for the component.
- A sufficiently charged detector, remote control or headphones.
- The exact model and current firmware version.
- The official XP Updater.
- Optional notes or photos of your personal settings.
Which browser can you use?
Use a modern browser such as Google Chrome, Microsoft Edge or Firefox, provided it is supported by the current XP Updater.
Some update features may depend on browser and USB compatibility. Follow the instructions displayed by the updater on your computer.
Can you use any USB cable?
No. Some cables are designed for charging only and cannot transfer data. Certain XP components may also require a specific update or connection cable.
Whenever possible, use the original XP cable specified for the update procedure.
Should you save your custom programs?
Yes, that is advisable. Some firmware updates can affect settings or personal search programs.
Take photos or make notes of the settings you may want to restore later.
Do not interrupt an update unnecessarily. Do not disconnect the USB cable or switch off a component while the official updater is working unless XP explicitly instructs you to do so.
3. Updating XP DEUS II: Step by step
For the DEUS II, use XP's official DEUS II update procedure. Depending on the current instructions, it can update the remote control, supported headphones and search coil software.
Step 1: Check your DEUS II configuration
Check which components you use. Do you have a full remote control (RC), a WS6 ST Master or an older DEUS II headset? Note the current firmware versions and any special settings.
Step 2: Open the XP Updater
Visit the official update platform:
https://updater.xpmetaldetectors.com/
Select the update procedure for DEUS II.
Step 3: Select the correct version
Read which software versions are available and which components each update supports.
Do not simply select an older or newer version without first checking the relevant XP instructions.
Step 4: Connect the correct component
The updater will tell you when and how to connect the remote control or headphones and put them into update mode.
Use the cable specified by XP. The procedure for the RC may differ from that for the WS6 ST or other headphones.
Step 5: Follow the on-screen instructions
Wait for the updater to finish the process. Do not disconnect anything until XP indicates that it is safe to do so.
Step 6: Check other components
Different DEUS II components may have their own software. Check whether XP requires any other components in your configuration to be updated as well.
Step 7: Test your detector
Restart the DEUS II if the update procedure requires it. Check the search coil connection, audio and control functions.
Note: The exact menu sequence and connection procedure may change between software versions. Always follow the current XP Updater instructions.
4. Updating XP ICON and ICON X
XP provides a dedicated update procedure for the ICON and ICON X. According to XP, it supports updating the control unit and headphones within a compatible ICON system.
Do not automatically use the DEUS II procedure for an ICON or ICON X, even though they belong to the wider XP FMF family.
How to update your ICON
- Check your model. Are you using an ICON or ICON X?
- Note the current firmware. Also check which headphones are paired.
- Open the official XP Updater. Select the ICON / ICON X procedure.
- Check the version information. See which components the update applies to.
- Connect the component. Use the correct cable and follow the on-screen instructions.
- Wait for installation to finish. Do not interrupt the update process.
- Test everything afterwards. Check the controls, search coil connection, audio and personal settings.
Do you also need to update the search coil on ICON and ICON X?
The official ICON Updater specifically mentions the control unit and headphones. Whether additional actions are needed for the search coil depends on XP's current instructions.
Do not follow a DEUS II search coil procedure simply because you assume the ICON works in the same way.
What if the ICON sounds different after updating?
First check whether the selected search program and your personal audio settings still match your previous configuration.
A change in sound does not necessarily mean that your detector is performing worse.
5. Important: Mandatory firmware V4.21 for XP ST headphones
In October 2026, XP announced an important firmware update for its current wireless stereo headphones:
- XP WSA ST
- XP WSA XL ST
- XP WS6 ST
The required version is firmware V4.21.
Why did XP release this update?
According to XP, the update improves volume control and fixes a very rare identified issue.
XP has stated that installation is mandatory for the affected ST headphones, both for units already sold to customers and for units still in stock.
IMPORTANT XP NOTICE – OCTOBER 2026
Firmware V4.21 is mandatory for ST headphones.
XP has instructed dealers not to sell the affected WSA ST, WSA XL ST or WS6 ST without this update, including when supplied as part of a complete metal detector package.
Already own ST headphones? Check whether the required update is installed and follow XP's official update procedure.
Does V4.21 also apply to older WSA II or WS6 headphones?
The mandatory ST update applies to the newer stereo versions.
The older WSA II, WSA II-XL and WS6 have now been replaced by the ST models, but may still be used by existing DEUS II owners. They are not the same hardware as the new ST versions.
For older components, check separately which firmware XP specifies.
Do I also need to update my entire detector to V4.21?
Do not assume that automatically. The version mentioned here relates to the announced update for the affected ST headphones.
Check which firmware version is intended for each device and component, and which combinations XP supports.
How do I update my ST headphones?
- Confirm that you have a WSA ST, WSA XL ST or WS6 ST.
- Go to the official XP Updater.
- Select the appropriate update procedure for your detector and headphones.
- Follow the prescribed connection and update instructions.
- Check that the correct firmware was installed.
- Test the pairing, audio and especially the volume control.
6. Updating WS6 ST: Headphones and control module
The WS6 ST is special because it can do more than provide wireless audio when used with the DEUS II.
Its detachable module with a display can also operate as an independent Master control unit.
What makes its update different?
With a WS6 ST, you need to consider how the module is used in your particular configuration.
Do you use the WS6 ST as audio headphones alongside a DEUS II remote control, or as an independent Master controlling the search coil?
This distinction matters when following the correct XP instructions.
WS6 ST Master with separate WSA ST
In a compatible configuration, the WS6 ST module can control the detector while you listen through WSA ST or WSA XL ST headphones.
When several electronic components are involved, check after an update that they still communicate correctly.
What if my WS6 ST cannot find the search coil after updating?
First check the software versions and the registered search coil. Follow the official instructions for your configuration.
Do not immediately delete all existing pairings. That can make troubleshooting unnecessarily complicated.
7. Firmware versions: Why must components be compatible?
A wireless XP detector consists of several electronic components that communicate with one another.
A firmware update can affect how these components exchange information.
Different firmware versions within one detector package
A detector and its headphones may have separate software versions. This does not automatically indicate a problem.
The important thing is that XP supports the combination.
Can an update affect older headphones?
Yes. Compatibility can vary between software versions. In earlier DEUS II updates, XP distinguished between older mono headphones and the new ST models.
Always check whether an update is suitable for your exact headphone model, particularly if you use an older WSA II, WSA II-XL or WS6.
What should you check before combining different components?
Check the model, firmware version, official compatibility information and recommended pairing procedure.
This applies, for example, when adding a second search coil or switching from conventional headphones to a WS6 ST Master.
8. XP update failed: What can you check yourself?
A failed update does not automatically mean that your detector or headphones are defective.
It is often best to check the connection, browser, cable and update procedure first.
| Problem | Possible cause | What can you do? |
|---|---|---|
| Updater does not open | Browser or web environment | Try a current, supported browser. |
| USB device not found | Cable, port or update mode | Check the correct XP cable and required connection steps. |
| Update gets stuck | Communication issue or interrupted process | Follow XP's recovery instructions first. Do not simply disconnect the device. |
| Wrong model selected | Incorrect product family chosen | Check DEUS II, ICON / ICON X or the original DEUS. |
| No audio after update | Software, pairing or audio selection | Check compatible firmware, audio output and headphone pairing. |
| Search coil will not connect | Firmware or existing registration | Check compatibility and follow the official search coil registration procedure. |
1. My computer does not recognise the XP device
Check that you are using the correct cable and whether XP requires the component to be in update mode.
If appropriate, try another suitable USB port and review the updater instructions.
2. The updater displays an error message
Write down the complete error message and the step at which it appears. Take a screenshot if possible.
This information is far more useful than simply reporting that the update does not work.
3. The update was interrupted
Follow XP's official recovery procedure for your model. Avoid random resets and do not install firmware files from unofficial sources.
4. The detector works, but the headphones do not
Check whether the headphones are compatible with the installed firmware and whether a separate headphone update is required.
5. My custom programs have changed
Check the release notes and compare your current settings with any photos or notes you made before updating.
6. When should you contact Detect?
If the update continues to fail despite following the correct official procedure, or if your device no longer operates normally afterwards.
Provide the exact model, software versions, error message and a description of the steps you have already taken.
9. What should you check after an XP update?
A message confirming that the firmware was installed successfully does not mean you should immediately head into the field without checking anything.
Post-update checklist
- Check the displayed firmware version of the updated component.
- Restart the detector according to XP's instructions.
- Check the connection between the control unit and search coil.
- Test the headphone audio.
- Check the volume controls.
- Compare your personal programs and settings.
- Use a safe, familiar metal object to check that the detector responds normally.
- Check that other paired accessories work correctly together.
Do you need to readjust your settings?
That depends on the update. Check whether your personal settings have been retained and only make changes where necessary.
What if the detector sounds different?
New software can change audio settings or signal processing. Check the release information and the selected audio mode before assuming there is a fault.
Can you start detecting immediately?
Yes, once the update has finished correctly, all required components have been updated and the detector is working properly.
Frequently asked questions about XP firmware updates
Where can I update my XP DEUS II?
Use the official XP Updater at updater.xpmetaldetectors.com. Select DEUS II and follow the current instructions.
Can I update an XP ICON using the same updater?
XP uses the same official update platform but provides a separate procedure for ICON and ICON X. Always select the correct product family.
Do I also need to update my DEUS II search coil?
That depends on the update. XP also supports search coil software within the DEUS II update environment. Follow the current instructions for your configuration.
Which firmware is mandatory for XP ST headphones?
In October 2026, XP made firmware V4.21 mandatory for WSA ST, WSA XL ST and WS6 ST to improve volume control and resolve a rare issue.
Does firmware V4.21 also apply to older WSA II headphones?
The mandatory V4.21 update was announced for the current ST headphones. Check separately which software is suitable for older mono headphones.
Do I need to update my XP headphones separately?
Possibly. Some components in XP wireless systems have their own firmware. The official updater indicates which components need updating.
Can I update using my phone?
Use a computer, browser and connection procedure supported by XP. Do not assume the updater will work directly on every phone or tablet.
Why does my computer not recognise the headphones?
Possible causes include the USB cable, incorrect update mode, browser settings or a missing step in the required procedure.
Will I lose my custom search programs?
That depends on the update. Record important personal settings before installing new firmware.
What if the update fails halfway through?
Follow XP's official recovery instructions. Avoid unnecessary interruptions and write down any error messages. Contact Detect if recovery is unsuccessful.
Will older XP headphones still work after a DEUS II update?
That depends on the specific software version and headphone model. Always consult XP's official compatibility information.
Can Detect help me with an XP update?
Yes. As the official XP importer for the Netherlands, Detect can help with questions about firmware versions, compatibility and update problems.
Updating XP: Key points to remember
- Only use the official XP update platform.
- Select the correct product family: DEUS II, ICON / ICON X or the original DEUS.
- Check firmware versions and compatibility for all affected components.
- Use a suitable USB data cable and a supported browser.
- Record personal settings before updating.
- XP has made firmware V4.21 mandatory for WSA ST, WSA XL ST and WS6 ST.
- Do not interrupt an ongoing update unnecessarily.
- After updating, test connections, audio, volume control and search programs.
- If you need help, Detect is here for you.
MORE FROM THE XP KNOWLEDGE CENTRE
Want to learn more about your XP equipment?
Explore our other detailed guides and comparisons.
Official XP updates and user manuals
For the latest update procedures, software versions and compatibility information, consult XP's official resources.
- XP Updater – official update platform
- XP – DEUS II, ICON and other updates
- XP – official user manuals
This guide provides general information. The most appropriate firmware depends on XP's current release and the combination of detector, headphones and search coil. Where technical details differ, always follow the latest official XP instructions.
Need help updating your XP? Detect is here to help
A firmware update does not have to be complicated, but it is important to follow the correct procedure for your detector and headphones.
At Detect Metaaldetectors in Almelo, we're happy to help with questions about the XP DEUS II, ICON, ICON X, ST headphones and compatibility.
As the official XP importer for the Netherlands, we can advise you on the software and components suitable for your configuration and help if an update fails.
Have a question? Contact us at [email protected] or visit our showroom in Almelo.
Detect Metaaldetectors – your XP specialist for knowledge, updates and service.
