Menu
EUR
  • Free shipping from €100 in NL, BE & DE
  • Ordered before 16:00, shipped the same working day
  • Exclusief importeur van XP Metaaldetectors in Nederland
  • Testen voor kopen in onze showroom in Almelo

XP DEUS II Explained: Programs, Settings and Practical Tips

DETECT KNOWLEDGE BASE | XP KNOWLEDGE CENTRE

The XP DEUS II can do an incredible amount. But which settings really make a difference when you're detecting? And do you actually need to use all those features?

The XP DEUS II is a fully wireless metal detecting system featuring FMF technology, a variety of search programs and extensive options for adjusting audio and detection behaviour. That makes it interesting for beginners and experienced detectorists alike.

In this comprehensive guide, we explain how the DEUS II works, which programs may suit different types of terrain, what settings such as Reactivity and Ground Balance actually do, and how to avoid common mistakes. With practical advice from Detect Metaaldetectors, the official XP importer for the Netherlands.

What makes the XP DEUS II special?

The XP DEUS II combines XP's FMF (Fast Multi Frequency) technology with wireless communication between the search coil, control unit and headphones. You can choose between factory programs and use the detector on different types of ground.

FMF technology

Multiple frequencies simultaneously, with specialised processing for different targets and soils.

12 factory programs

Programs for general detecting, iron-contaminated locations and beach use.

Wireless system

Wireless search coil, control unit and compatible headphones.

Advanced settings

Including Reactivity, discrimination, audio, Ground Balance and interference reduction.

Our most important advice: Start with a suitable factory program. You don't need to adjust every advanced setting straight away to make great finds.

1. How does the XP DEUS II work?

On the XP DEUS II, electronics inside the search coil process detection signals and transmit the data wirelessly to a compatible control unit and audio system.

Depending on the configuration, you can use the full remote control, often called the Remote Control or RC, or a WS6 module as the control unit.

What do you see and hear while detecting?

When the search coil detects a metal object, the DEUS II processes the received signals. You hear an audio response and, depending on the program and control unit, may see a Target ID number.

The tone, identification number and signal strength provide clues about the target. However, the detector cannot determine with certainty whether a coin, ring, pull tab or another object is buried.

Is the XP DEUS II suitable for beginners?

Yes. Factory programs allow you to start detecting without extensive technical knowledge. At the same time, there are plenty of options for experimenting as your experience grows.

It's sensible to become familiar with a standard program before changing lots of advanced settings.

2. What is FMF on the XP DEUS II?

FMF stands for Fast Multi Frequency. In FMF programs, the DEUS II uses multiple frequency components simultaneously, together with specialised signal processing.

Different frequencies can emphasise different properties of metal targets and soil. The DEUS II uses this information to produce useful detection signals in varied conditions.

Why is FMF useful?

  • Versatility when detecting different kinds of metal targets.
  • Options for dealing with certain challenging ground conditions.
  • Suitable search programs for land and wet saltwater sand.
  • Different FMF profiles to choose from depending on the terrain.

Can the DEUS II also work with a single frequency?

Yes. In addition to FMF programs, the DEUS II offers DEUS MONO, allowing you to select individual detecting frequencies.

XP specifies an approximate frequency range of 4 to 45 kHz in its official product information, with different selectable steps.

Does FMF always detect deeper?

No. Detection depth depends on target size, metal type, soil, search coil and settings, among other factors. FMF can provide advantages in certain situations but doesn't guarantee extra depth for every object.

Read Detect's explanation of multi-frequency detecting →

3. XP DEUS II with remote control or WS6 Master?

The DEUS II comes in several configurations. One major difference is how you operate the detector.

DEUS II with RC

The full remote control has its own screen and provides extensive access to settings and functions.

An appealing option if you enjoy exploring the different programs and adjustments.

Package contents can differ depending on the bundle and headphones.

DEUS II WS6 Master

The WS6 module can function as the main control unit, so you don't necessarily need a separate RC to operate the detector.

A compact, lightweight solution with plenty of capabilities.

Access to certain functions and the operating procedure may differ from the full RC.

Note: XP headphone generations and compatibility vary by product and firmware version. When adding components, always check that they work with your exact DEUS II configuration. The current headphone generation consists of the ST models.

View XP DEUS II configurations at Detect →

4. The 12 XP DEUS II search programs explained

According to XP, the DEUS II offers twelve factory programs and twelve memory slots for customised programs. Factory programs combine different frequency and filtering settings for specific detecting conditions.

Below, we explain their main applications. Exact settings may change between firmware versions.

Program Features and use
GENERAL Versatile FMF program and a comfortable starting point for different land conditions.
SENSITIVE Designed for good sensitivity to a variety of targets, including smaller objects.
SENSI FT A Full Tones variant offering a different, information-rich audio response.
FAST Useful for target separation on iron-contaminated ground.
PARK Suited to sites with a variety of modern metal objects, where detecting is permitted.
DEEP HC Focused on certain high-conductivity targets; useful in suitable conditions on relatively quiet ground.
DEUS MONO Detecting with a selected single frequency rather than simultaneous FMF.
GOLD FIELD Specialised detection for small, difficult targets in certain ground conditions.
RELIC Designed for relic detecting, with a different approach to faint and ground-related signals.
DIVING For suitable underwater use in accordance with XP instructions.
BEACH For beach detecting, including wet saltwater sand.
BEACH SENS A more sensitive beach variation for suitable conditions.

Which program should you start with?

For a first detecting session on ordinary farmland, GENERAL is a logical starting point. On a heavily iron-contaminated site, FAST may be useful. For wet saltwater sand, select a suitable beach program.

The names don't tell the whole story. The programs also differ in frequency combinations, filtering, audio and other settings.

Detect's tip

On your first detecting days, stick with one or two programs rather than constantly switching. You'll soon become more familiar with how the same coin, nail or piece of aluminium sounds.

5. Your first detecting day with the XP DEUS II: Step by step

  1. Charge all the components you will use. This includes the search coil, control unit and headphones.
  2. Check the assembly. Make sure the coil is attached securely and that all components are compatible and correctly paired.
  3. Choose a permitted detecting location. Check permissions and applicable rules.
  4. Start with GENERAL. Begin with the default settings.
  5. Check that the detector is stable. Use the recommended interference reduction function if necessary.
  6. Test a known metal object. Listen to the audio and observe the Target ID.
  7. Sweep the coil steadily. Keep it parallel to the ground and overlap your sweeps.
  8. Only change settings when you know why. This helps you understand the effect of each adjustment.

The important thing isn't how many settings you've tried on your first day, but whether you've started to understand what the detector is telling you.

6. Sensitivity and Noise Cancel: Keeping the DEUS II stable

What does Sensitivity do?

Sensitivity affects how strongly the detector responds to received signals. A higher setting may help with certain weaker targets in favourable conditions but can also produce more unwanted responses.

Maximum sensitivity isn't automatically the best setting.

When should you lower sensitivity?

For example, when the detector is constantly unstable and you've investigated other possible causes, such as electrical interference or unsuitable settings.

What is Frequency Scan?

The DEUS II has a frequency scan function that can help reduce electromagnetic interference.

Electrical equipment and other detectors sometimes cause interference. A scan can help identify a more suitable frequency position.

Important: Noise Cancel is not the same as Ground Balance. The first deals with electronic interference; Ground Balance helps manage certain ground responses.

7. Adjusting Reactivity: How can you detect better among iron?

Reactivity is XP's term for recovery speed. It influences how quickly the detector processes consecutive signals.

What happens when you increase Reactivity?

The detector can often separate objects that lie close together into more distinct signals. This is useful on sites containing many nails or other iron objects.

What happens when you reduce Reactivity?

Signals generally last a little longer, and in suitable conditions a lower setting may be advantageous for certain weak or deeper targets.

Which setting is best?

That depends on the location. Higher Reactivity can help where there is a lot of iron, while a lower setting may be beneficial on clean ground.

First learn how your chosen factory program behaves, then experiment deliberately.

Read more about Reactivity and discrimination →

8. Discrimination, Silencer and Iron Volume: What's the difference?

The XP DEUS II offers several settings that influence how iron and other metal targets are represented by sound.

Setting Function
Discrimination Determines how certain target categories are rejected or represented, partly depending on the audio mode.
Silencer Helps filter certain misleading responses from iron.
Iron Volume Controls the loudness of relevant low or iron-like tones.
Notch Allows specific Target ID ranges to be selectively rejected.

Why shouldn't you filter everything out?

A metal detector cannot identify the exact object with certainty. A small piece of jewellery, coin fragment or another interesting target may have a Target ID that overlaps with modern metal rubbish.

Interesting objects close to iron can also produce mixed signals. Overly aggressive filtering may make them harder to recognise.

Is Silencer 0 always better?

No. Less filtering may let you hear more information in certain conditions, but it can also produce more misleading iron responses. The best choice depends on the terrain, audio mode and firmware version.

Our advice: Start with the default settings and avoid changing Reactivity, discrimination and Silencer all at once.

9. Ground Balance and mineralisation on the XP DEUS II

A metal detector doesn't respond only to separate metal objects. Certain soil properties can also affect the received signal.

Ground Balance helps the detector handle those ground responses appropriately.

What is GRAB?

The XP DEUS II has a GRAB function that lets you measure the ground response over an area as free from metal as possible.

You move the search coil above the ground according to XP's instructions. The detector uses the measurement to adjust Ground Balance.

What is Tracking?

Tracking attempts to adjust Ground Balance continuously while you're detecting. This can be useful on ground where mineralisation changes relatively consistently.

On sites with many pieces of iron, bricks or local disturbances, Tracking isn't always the best option.

Should you always perform Ground Balance again?

No. On relatively quiet ground, the default value may already work well. Adjust Ground Balance when the conditions call for it and follow XP's recommendations.

Read our full guide to Ground Balance and mineralisation →

10. Audio, tones and Target ID: Learn what your DEUS II is telling you

A major strength of the DEUS II is the ability to present detection signals through different audio systems.

Depending on the search program and firmware, you can use multiple tones, Full Tones and various audio types.

Why is audio so important?

A Target ID is an estimated indicator, not a guaranteed identification. Numbers can vary on deep, small or irregularly shaped objects.

By listening carefully, you'll learn to judge signal repeatability and characteristics more effectively.

What are PWM and Square audio?

XP uses different audio types, including PWM and Square. They have different sound characteristics, which can influence how you interpret signals.

Your preferred audio response is largely personal. A clear, familiar sound you understand well is more valuable than constantly switching between every available option.

What does Audio Response do?

Audio Response influences how strongly or loudly signals are reproduced. Increasing it can make certain weak signals easier to hear, but doesn't automatically increase actual detection depth.

How do you learn to interpret Target ID?

Test familiar objects such as a coin, ring and a safe piece of iron. Compare the tone, numbers and response when sweeping from different directions.

Learn more about Target ID and changing numbers →

11. Which search coil is right for your XP DEUS II?

The search coil significantly affects how comfortably and effectively you detect. XP offers FMF coils in several sizes.

22.5 cm FMF

Compact and manoeuvrable, useful on iron-contaminated sites or in confined areas.

28 cm FMF

Versatile all-round size offering a good balance of coverage, weight and target identification.

34 × 28 cm FMF

Useful for covering more ground on larger open sites and, in certain conditions, providing additional reach.

Is the largest coil always best?

No. A larger coil may cover more ground, while a smaller coil can offer advantages where many metal objects lie close together.

What about XP HF and HF2?

XP also offers high-frequency coil systems for specialised applications. It's important to check compatibility, available frequencies and current firmware.

The older XP HF range belongs to the original DEUS/ORX generation and is not the same as the modern HF2 for compatible FMF systems. Not every XP coil works with every XP detector.

Explore DEUS II configurations and coil sizes at Detect →

12. XP DEUS II on the beach and underwater

The DEUS II is designed for detecting on land and in water. XP specifies waterproofing to 20 metres for suitable components and configurations.

It's important to distinguish between the waterproof ratings of the coil, remote control and headphones.

Detecting on wet saltwater sand

Conductive saltwater can cause unwanted responses on some metal detectors. The DEUS II has dedicated beach programs to deal with these conditions.

On wet saltwater sand, start with a suitable BEACH program rather than simply reusing a land program.

What should you know about underwater detecting?

Specific XP instructions apply underwater. These include the correct seals, suitable underwater audio and the antenna system specified by XP for underwater communication.

The DEUS II remote control also uses different sealing caps for ordinary use and deeper immersion. Always fit the correct cap for your conditions.

Important

Do not assume every headset or configuration is waterproof to 20 metres. Check each component separately and follow XP's underwater instructions. After saltwater use, rinse the equipment with fresh water as directed in the manual.

Also read: Choosing a detector for the beach or field →

13. XP DEUS II firmware updates and wireless components

XP continues to develop the DEUS II through firmware updates. These may add features, change settings or resolve problems.

The exact functions depend on the firmware version and the combination of components.

Do you have to install every update?

Check the official release information. Some updates are important for compatibility or fixing specific issues.

When XP explicitly makes an update mandatory for a component, follow that instruction. This includes the announced mandatory V4.21 update for the current WSA ST, WSA XL ST and WS6 ST headphones.

What should you check before updating?

  • The exact model of your detector and headphones.
  • The currently installed firmware versions.
  • Whether all components are compatible with the new software.
  • The official update procedure required.
  • Whether your custom programs and settings should be recorded first.

What if your search coil loses its connection?

First check the battery level and existing pairing according to the XP manual. Don't immediately unpair or reprogram everything without a reason.

If the issue continues in several locations, contact Detect for advice on targeted troubleshooting.

View the official XP user manuals →

14. Practical DEUS II settings for different types of terrain

These examples are starting points, not fixed numerical settings that will work on every site.

Terrain Good starting point What to consider
Ordinary field GENERAL Learn the usual audio response and Target ID.
Heavy iron debris FAST or suitable Reactivity Target separation, short signals and sweep direction.
Relatively clean ground GENERAL or another suitable land program Consider testing a lower Reactivity deliberately.
Wet saltwater beach BEACH Salt handling, stability and suitable equipment.
Highly variable ground responses Suitable program and check Ground Balance Distinguish ground responses from real targets and electromagnetic interference.

What's the best setting for coins?

There is no universal coin setting. A small thin coin, a larger silver coin and a coin next to a nail can respond very differently.

Good detecting performance comes from combining a suitable search program, coil, audio response and experience.

Do you need to adjust every expert setting?

No. Factory programs are designed to be useful without complicated changes.

If you want to experiment, change one setting at a time and compare the result against the original configuration.

15. Seven common mistakes when setting up the XP DEUS II

1. Changing all the settings immediately

You won't know which adjustment caused the change in signal behaviour.

2. Always using maximum sensitivity

An unstable detector can actually make weak signals harder to assess.

3. Always setting Reactivity as low as possible

A lower value may be beneficial in suitable conditions, but faster recovery can help among iron.

4. Relying only on Target ID

Numbers may fluctuate, especially on deep, small or mixed targets. Listen to the audio as well.

5. Forcing an unsuitable Ground Balance value

Don't constantly perform GRAB when the detector is stable. Use the ground measurement when conditions require it.

6. Blindly copying settings from another firmware version

XP updates can change the operation and available options.

7. Assuming the biggest search coil is always better

A larger coil may cover more ground, while a smaller one can be easier to use on heavily contaminated sites.

Setting up the XP DEUS II: Key points to remember

  • Start with a suitable factory program such as GENERAL on ordinary land.
  • Use FMF as a versatile starting point and experiment with DEUS MONO later.
  • Adjust Sensitivity deliberately when needed.
  • Higher Reactivity can help on iron-contaminated ground.
  • Excessive discrimination can suppress interesting targets.
  • Use GRAB and other Ground Balance functions according to the XP manual when conditions require it.
  • Choose your search coil based on terrain, weight and target separation.
  • Before firmware updates, check the exact configuration and compatibility.

Frequently asked questions about the XP DEUS II

What's the best program on the XP DEUS II?

It depends on the terrain. GENERAL is a versatile starting point for many land sites. FAST may help among iron, while BEACH is designed for beach conditions.

How many search programs does the DEUS II have?

XP specifies twelve factory programs and twelve memory slots for customised programs. Available features and defaults may vary between software versions.

What is FMF on the DEUS II?

FMF stands for Fast Multi Frequency. In FMF programs, the detector uses multiple frequency components simultaneously to process different types of targets and ground conditions.

Can I use a single frequency on the XP DEUS II?

Yes. DEUS MONO lets you select individual frequencies within the range specified by XP for the DEUS II.

What is Reactivity?

Reactivity is the detector's recovery speed. A higher setting may help separate nearby targets. A lower setting can be beneficial for certain weak or deep signals on suitable clean ground.

What does Silencer do?

Silencer helps filter certain misleading iron responses. Its behaviour may vary by firmware version and program.

Do I always have to set Ground Balance?

No. On quiet ground, the default may be sufficient. Use the recommended ground measurement when conditions call for it.

Which search coil is best for the DEUS II?

The 28 cm FMF is a versatile all-round choice. The compact 22.5 cm can be useful among iron, while the 34 × 28 cm offers more ground coverage.

Can I use the XP DEUS II underwater?

Yes, with a suitable configuration. XP specifies waterproofing to 20 metres for the relevant components. Use the correct seals, antenna and underwater audio equipment according to the manual.

What's the difference between RC and WS6 Master?

With RC, you use the full remote control. With WS6 Master, the WS6 module can work independently as the control unit. Operation and available functions vary by configuration.

Why is my XP DEUS II giving false signals or interference?

Possible causes include electromagnetic interference, ground responses, high sensitivity or a connection issue. Start with the standard checks before assuming the detector is defective.

MORE FROM DETECT

Want to learn more about your XP DEUS II?

We've covered these technical topics in more detail in our knowledge base.

Official XP information

For exact operating instructions, current settings and firmware details, always consult XP's official documentation.

This article is intended as a practical guide. Exact menu names, adjustment ranges, audio options and compatibility can vary depending on firmware, control unit and search coil.

Get more from your XP DEUS II with Detect

The XP DEUS II offers a wide range of capabilities, but the best results don't start with complicated settings. They start with understanding how your detector responds to the ground you're searching.

At Detect Metaaldetectors in Almelo, we're happy to help you choose and set up an XP DEUS II, compare search coils and solve technical questions.

As the official XP importer for the Netherlands, we have extensive experience with different DEUS II configurations, headphones, accessories and technical support.

Explore all XP DEUS II metal detectors at Detect →

Detect Metaaldetectors – your XP specialist for knowledge, advice and service.

Choose your language
Choose your currency
€

Recently added

Total incl. tax
0,00
Order for another €100,00 and receive free shipping
0
Compare
Start comparison

This product has been added to your cart