DETECT KNOWLEDGE BASE | XP KNOWLEDGE CENTRE
Your metal detector gives a promising signal. You carefully remove some soil, but the object is still nowhere to be seen. A pinpointer helps you locate the target more precisely.
The XP MI-4 and XP MI-6 are popular accessories from XP Metal Detectors. Both are rechargeable, waterproof to 6 metres and offer adjustable sensitivity, sound, vibration and LED lighting.
There is one key difference: the MI-6 offers additional wireless features when paired with a compatible XP metal detector. This guide explains when the MI-4 is sufficient and when the MI-6 is worth choosing.
XP MI-4 or MI-6? The short answer
MI-4: a reliable standalone pinpointer
Choose this sturdy, waterproof, rechargeable pinpointer if you do not need a wireless connection to your metal detector.
MI-6: get more from your XP system
Choose this if you want to pair your pinpointer with a compatible XP detector and benefit from additional audio, settings and location features.
Our advice: For standalone use, the MI-4 is often the sensible choice. If you use an XP DEUS II, ICON, ICON X, DEUS or ORX, the MI-6 may be worth the extra investment. Available features vary between systems.
On this page
- 1. What does a pinpointer do?
- 2. XP MI-4 vs MI-6: key differences
- 3. XP MI-4: a complete standalone pinpointer
- 4. XP MI-6: what extra features do you get?
- 5. Wireless pairing with XP detectors
- 6. Sound, vibration and sensitivity
- 7. Waterproofing and beach use
- 8. Charging, battery life and maintenance
- 9. Prices: is the MI-6 worth the extra cost?
- 10. Which pinpointer suits you?
- 11. Common issues and troubleshooting
- Frequently asked questions about the XP MI-4 and MI-6
1. What does a pinpointer do?
A pinpointer is a compact handheld metal detector designed to pinpoint a metal object at close range.
Your regular metal detector helps locate a target in the ground. But once the hole is open, a small coin or button can be difficult to spot among soil, roots and stones. A pinpointer makes this final step easier.
How do you use a pinpointer?
- First locate the target with your regular metal detector.
- Check the position of the signal.
- Carefully open the ground where it is permitted and safe to do so.
- Move the pinpointer along the soil and sides of the hole.
- Follow the sound or vibration to narrow down the location.
- Inspect the object and leave the ground tidy.
A pinpointer does not replace a conventional metal detector; it helps you recover a target you have already located.
If you encounter suspected explosives, ammunition or another hazardous object, do not touch or move it. Follow local safety procedures. Using a pinpointer does not make an unknown object safe.
2. XP MI-4 vs MI-6: key differences
The two models have very similar core functions. The MI-4 works independently, whereas the MI-6 also offers wireless integration with compatible XP systems.
| Feature | XP MI-4 | XP MI-6 |
|---|---|---|
| Standalone operation | Yes | Yes |
| Waterproof | Up to 6 m | Up to 6 m |
| Rechargeable battery | Yes | Yes |
| Operating frequency | 12 kHz | 12 kHz |
| LED light | Yes | Yes |
| Sound and vibration | Yes | Yes |
| Pitch and Pulse audio | Yes | Yes |
| Standalone sensitivity | 3 levels | 3 levels |
| XP wireless pairing | No | Yes |
| Audio through compatible XP system | No | Yes |
| Extra controls through detector | No | On supported systems |
| Find-lost-pinpointer feature | No | With supported configurations |
| Holster and securing lanyard | Included | Included |
Advanced wireless settings vary by detector model and firmware version. The ICON, DEUS II, original DEUS and ORX do not necessarily offer identical functions.
3. XP MI-4: a complete standalone pinpointer
The XP MI-4 is designed for detectorists who want a dependable pinpointer without wireless pairing.
Switch it on, choose your settings and pinpoint your find using sound, vibration or both. No detector connection is required.
What can the MI-4 do?
- Pinpoint nearby metal objects accurately.
- Adjust sensitivity across three levels.
- Choose between Pitch and Pulse audio.
- Use sound, vibration and the LED light.
- Detect underwater to the manufacturer-rated depth of 6 metres.
- Recharge using the intended USB connection.
Who should choose the MI-4?
Beginners, people using other detector brands and XP users who do not need wireless integration. It is also a useful backup pinpointer.
Is the MI-4 less sensitive than the MI-6?
In standalone operation, their key functions are comparable. The MI-6 mainly adds extra options when paired with a supported XP system.
4. XP MI-6: what extra features do you get?
The XP MI-6 offers nearly the same practical core functions, plus wireless communication with compatible XP metal detectors.
Audio directly through your headphones
With a compatible XP setup, you can hear the pinpointer signal through your XP system. This is useful when you already use XP wireless headphones.
Additional detector-controlled settings
On supported DEUS and ORX setups, XP describes finer sensitivity controls, different audio modes and programmes. Suitable configurations may provide up to 50 sensitivity levels.
Find a misplaced MI-6
A dedicated locating feature is available with some supported paired setups. Keep using the included securing lanyard even when you have this feature.
Reduce interference
XP also describes ways to minimise unwanted interference between the MI-6 and certain XP detectors.
Can the MI-6 work without an XP detector?
Yes. It works independently as a regular pinpointer, even without wireless pairing.
5. Wireless pairing with XP detectors
According to XP, MI-6 wireless pairing is supported across several XP platforms, including modern FMF detectors and earlier DEUS and ORX generations.
| Metal detector | MI-4 | MI-6 |
|---|---|---|
| XP DEUS II | Standalone | Wireless pairing possible |
| XP ICON | Standalone | Wireless pairing possible |
| XP ICON X | Standalone | Wireless pairing possible |
| XP DEUS 1 | Standalone | Wireless pairing possible |
| XP ORX | Standalone | Wireless pairing possible |
| Other detector brands | Standalone | Standalone, without XP integration |
Please note: wireless compatibility does not mean that every detector offers exactly the same controls or settings. Check the XP manual and firmware version.
Pairing the MI-6 with DEUS II
Open the pinpointer pairing menu on your DEUS II and activate the MI-6 pairing mode as instructed by XP. Then check that the detector recognises the pinpointer and that audio works correctly.
Pairing the MI-6 with ICON or ICON X
Follow the official ICON-series pairing procedure. Controls and available functions may differ from the DEUS II.
6. Sound, vibration and sensitivity
Both pinpointers offer settings that make pinpointing metal targets easier.
Sound and vibration
Targets can be indicated through the speaker, by vibration or by combining the two. Vibration is helpful when you prefer to search quietly or are in a noisy environment.
Pitch / Pulse
XP offers two audio styles. Depending on the setting, the audible response changes as you approach the target.
What does sensitivity do?
Higher sensitivity can detect a target sooner in suitable conditions. Among numerous metal fragments, a lower setting may help with accurate pinpointing. Both have three standalone sensitivity levels and a retune function.
Retune
Retune recalibrates the response to current conditions. For example, it may help when a larger metal object is producing a continuous strong signal.
First learn how your pinpointer behaves with its default settings. Adjust the sensitivity when it genuinely helps you pinpoint a target more easily.
7. Waterproofing and beach use
XP rates both pinpointers waterproof to 6 metres. This makes them suitable, within XP’s guidelines, for wet soil, rain, mud and appropriate underwater use.
Which is better for the beach?
Either is a good choice when used independently. The MI-6 is especially useful if you also want the wireless capabilities of your XP detector.
Can you use them in salt water?
Always follow XP’s maintenance guidance. Rinse with fresh water after saltwater use as instructed and inspect the seals.
What should you check for underwater use?
Make sure the casing and charging cover are properly closed. Never charge while the connection is wet, and never use a damaged pinpointer underwater.
8. Charging, battery life and maintenance
Both pinpointers use a rechargeable lithium-polymer battery.
How long does the battery last?
Runtime depends on use of the speaker, LED, vibration and, with the MI-6, wireless communications. Detect quotes up to approximately 30 hours.
How do you recharge it?
Use the recommended XP charging cable. Keep the port clean and dry and follow the manufacturer’s instructions.
How can you avoid losing it?
Both models include a holster and securing lanyard. Attach the lanyard to your equipment to reduce the chance of losing the pinpointer.
Are replacement parts available?
XP offers replacement parts and accessories, including holsters and fastening components. Detect can help if you need a replacement.
9. Prices: is the MI-6 worth the extra cost?
At the time of writing, Detect lists these prices:
XP MI-4 – €129
Complete standalone pinpointer without XP wireless integration. View the XP MI-4 at Detect →
XP MI-6 – €169
Similar core features with additional wireless capabilities for compatible XP detectors. View the XP MI-6 at Detect →
Prices are indicative and include VAT. Always check the relevant product page for the current selling price.
What are you paying extra for with the MI-6?
Mainly wireless integration with suitable XP systems and the additional features it enables.
When would we recommend the MI-4?
If you use another detector brand or do not intend to pair your pinpointer wirelessly.
When would we recommend the MI-6?
If you use a compatible XP detector and want headphone audio, additional controls or the find-my-pinpointer feature.
10. Which pinpointer suits you?
| Your situation | Our recommendation | Why? |
|---|---|---|
| I use a Nokta, Garrett or another brand | MI-4 | No need for XP wireless pairing |
| I want the most affordable XP pinpointer | MI-4 | Important standalone functions included |
| I use an XP DEUS II | MI-6 | Wireless integration possible |
| I use XP ICON or ICON X | MI-6 | Compatible wireless options; check features |
| I often search in water | Either | Both waterproof to 6 m |
| I want audio through my XP headphones | MI-6 | With compatible configuration |
| I want a reliable spare | MI-4 | Independent and versatile |
What matters most is not the number of features but which ones you will actually use during your searches.
11. Common issues and troubleshooting
The pinpointer beeps continuously
Check for metal near the tip. Try lowering sensitivity or using Retune as directed by XP.
My MI-6 will not pair
Check the detector platform, firmware, battery charge and correct pairing procedure. Do not immediately remove every existing pairing.
No audio through my XP headphones
Check that the MI-6 is paired and the correct audio output is selected. Verify normal detector audio as well.
The pinpointer seems less responsive
Check settings, battery level and whether the tip is clean and undamaged. Test against a known metal object.
I have lost my pinpointer
Check the last places you dug. With a compatible paired MI-6, the locating feature may help.
When should I contact Detect?
If the unit still fails with normal settings and a charged battery, or if the casing or seals are damaged.
XP MI-4 or MI-6: at a glance
- Both are rechargeable and waterproof to 6 metres.
- Both offer sound, vibration, LED light and adjustable sensitivity.
- The MI-4 works independently and is sufficient for many detectorists.
- The MI-6 also works independently but offers compatible XP wireless integration.
- Extra MI-6 functions vary between XP platforms.
- For other metal detector brands, the MI-4 is often the better-value choice.
- For DEUS II, ICON, ICON X, DEUS or ORX owners, the MI-6 deserves consideration.
- Compare current prices and the functions you will genuinely use.
Frequently asked questions about the XP MI-4 and MI-6
What is the main difference?
The MI-6 can pair wirelessly with supported XP detectors. The MI-4 is standalone only. Their core functions are similar.
Is the MI-6 more sensitive?
Standalone sensitivity options are comparable. Supported XP systems may unlock additional MI-6 sensitivity settings.
Can I pair the MI-4 with DEUS II?
No. The MI-4 does not have wireless detector integration but can work alongside any metal detector.
Can the MI-6 pair with ICON and ICON X?
Yes, XP specifies wireless support. The extra functions depend on platform and firmware.
Does the MI-6 work with the original XP DEUS?
Yes. Wireless integration also supports the original XP DEUS and ORX.
Are both pinpointers waterproof?
Yes, XP rates both models to 6 metres under its specified conditions.
Do both have vibration?
Yes. Both support vibration, sound and different signalling settings.
Are the MI-4 and MI-6 rechargeable?
Yes, both have rechargeable lithium-polymer batteries.
Can I use the MI-6 without an XP detector?
Yes. It is fully functional as a standalone pinpointer.
What is the MI-6 locating feature?
With certain supported XP setups, a special feature helps locate a lost MI-6.
Which is better for beginners?
The MI-4 is a sensible standalone choice. If you use a compatible XP detector and want wireless functions, consider the MI-6.
Is the MI-6 worth the additional cost?
Especially if you use the wireless pairing and added features. Otherwise the MI-4 may be entirely sufficient.
More from the XP Knowledge Centre
Discover more of our guides and comparisons for your XP equipment.
Shop XP MI-4 and MI-6 at Detect
At Detect Metaaldetectors, you will find both genuine XP pinpointers and compatible accessories.
XP MI-4
Waterproof, rechargeable and fully standalone. View the XP MI-4 at Detect →
XP MI-6
The same strong fundamentals plus wireless integration for suitable XP systems. View the XP MI-6 at Detect →
Not sure which model suits your detector? We are happy to help.
Official XP specifications
Consult official XP documentation for technical details, operating instructions and current compatibility.
Wireless features and settings vary by detector platform and firmware version. Contact Detect if you need help.
XP MI-4 or MI-6? Detect can help you choose
The best pinpointer is not necessarily the one with the most functions. Both XP models are excellent tools for locating metal finds accurately.
If you mainly want a dependable, rechargeable and waterproof standalone pinpointer, the MI-4 is a logical choice.
If you want to connect wirelessly to a compatible XP DEUS II, ICON, ICON X, DEUS or ORX, the MI-6 offers additional options.
You can view and compare both pinpointers at Detect Metaaldetectors in Almelo. As the official XP importer for the Netherlands, we can help with advice, accessories, pairing and service.
Detect Metaaldetectors – locate your target faster with the right pinpointer.
